Skip to content

FAKES ARE NOT A GOOD DEAL, EVER - BEWARE OF COUNTERFEIT PRODUCTS, WE SELL ONLY THROUGH AUTHORIZED RETAILERS AND INGRID.BIKE - view all dealers

Ingrid
  • Shop
  • Bikes and Friends
  • Contacts
  • Account
  • Shopping Cart 0

    • No products in the cart.

FAKES ARE NOT A GOOD DEAL, EVER - BEWARE OF COUNTERFEIT PRODUCTS, WE SELL ONLY THROUGH AUTHORIZED RETAILERS AND INGRID.BIKE - view all dealers

Ingrid

ingridcomponents

info@ingrid.bike
grazie @ciclibarco Ray’s Sleigh . Velato red is a grazie @ciclibarco Ray’s Sleigh . Velato red is a timeless, spot-on choice, especially when paired with carefully chosen components. Finding the right balance between efficiency, elegance, and unmistakable Italian flair comes down to care, experience, and close attention to detail. . For those who were a little late with their letter to Santa, here are the full specs: . - Valsugana frame crafted with @columbus_official Spirit tube set - Columbus Futura All Roads fork - @campagnolosrl Ekar GT groupset - @ingridcomponents POP crankset - @damilcomponents Monstercross wheels - @ridededa Zero100 cockpit with gravel handlebars - @crankbrothers Eggbeater 1 pedals - @pirelli_cycling Cinturato Gravel RC tyres . Happy Holidays from the Barco family! 🎄 #nontiservonoleali
10 YEARS thanks 10 YEARS thanks
thanks @slugbicycles ____Pre-order Ends This Week_ thanks @slugbicycles ____Pre-order Ends This Week___ @jerometave started with our stock XT kit and swapped in some choice parts from @protostudia , @ingridcomponents , @doom.bars , and @dukeracingwheels Pre-order ends this week. Don’t miss out. #slug | #slugcorp | #slugbicycles
thanks @charboncycles VÉLOS D'EXPOSITION EN VENTE thanks @charboncycles VÉLOS D'EXPOSITION EN VENTE : - CHARBON Gravel (rose) . 3990 > 3200 euros . Taille S . Groupe Shimano GRX 1x11v . Fourche Columbus Cross+ . Roues DT Swiss G1800 . PĂ©riphĂ©riques Ritchey Comp - CHARBON All Road (Multicolore) . 6990 > 5500 euros . Taille M . Groupe Sram Rival AXS 1x12v . PĂ©dalier Ingrid . Fourche Columbus All Road . Roues Hunt 50 Aero Carbon . Pneus Continental GP5000 AR . PĂ©riphĂ©riques Deda Superzero Carbon . Rack et bagagerie Tailfin Custom . Peinture Custom par Curtis Bullock @savethepostalservice - CHARBON Gravel (brun) . 3990 > 2800 euros . Taille S . Groupe Shimano GRX 1x11v . Fourche Columbus Cross+ . Roues DT SWISS G1800 . PĂ©riphĂ©riques Ritchey Comp . Petit poc sur top tube > remplissage & nouvelle peinture = +400 euros - CHARBON All Road (bleu) . 3990 > 2800 euros . Taille M . Groupe Sword 2x10v . Fourche Columbus All Road . Roues DT Swiss E1800 . PĂ©riphĂ©riques Zipp . Petit poc sur top tube > remplissage & nouvelle peinture = +400 euros @stolengarage @association_artisans_cycles #framebuilding #filletbrazing #handmade #custom #custombike #bike #cycle #cycling #stainlesssteel #artisan #artisanat #paintjob #faitmainenfrance #craft #artisanatducycles #workshop #paint #bespokebike #custombicycle #customsteelbike #handmadebicycles #steelisreal
STORY grazie Alex @garage6studio [Studio] Ci sono STORY grazie Alex @garage6studio [Studio] Ci sono piccoli produttori che riescono a ritagliarsi un posto nell'oceano della bike industries. @ingridcomponents, italianissimi, hanno trovato il loro spazio e li hanno pure contraffatti. Segno che si copiano sempre i prodotti migliori. Voi perĂČ comprate l'originale, mi raccomando, perchĂ© queste piccole realtĂ , investano molto in tempo e risorse, per creare prodotti unici e di qualitĂ . #Garage6Studio #StudioPhotogtapy #CncMachines #BikeParts #IngridComponents
merci @victoirecycles FR : Jean-Louis est le frĂš merci @victoirecycles FR : Jean-Louis est le frĂšre de François, le propriĂ©taire du Victoire n°568, une randonneuse modernisĂ©e que nous vous prĂ©sentions prĂ©cĂ©demment. Jean-Louis a accompagnĂ© François lors de l’étude posturale de celui-ci, dans notre atelier Ă  Beaumont, en Auvergne. Il s’est dĂ©cidĂ© Ă  cette occasion de lui aussi commander un vĂ©lo Victoire, rĂ©pondant au mĂȘme cahier des charges que celui de son frĂšre, mais avec quelques diffĂ©rences marquĂ©es. Nous vous prĂ©sentons le Victoire n°569, une randonneuse lĂ©gĂšre et fraternelle. EN : Jean-Louis is the brother of François, the owner of Victoire No. 568, a modernized randonneuse that we presented to you previously. Jean-Louis accompanied François during his bike fitting at our workshop in Beaumont, Auvergne. On that occasion, he decided to order a Victoire for himself, with the same specifications as his brother’s, but with a few notable differences. Go to our website to discover Jean-Louis’ Victoire.
merci‱ @victoirecycles FR : François est un amateu merci‱ @victoirecycles FR : François est un amateur des randonneuses fabriquĂ©es en France au milieu du XX° siĂšcle. Il roulait jusqu’aujourd’hui sur un Routens d’époque, et nous a contactĂ© pour lui en construire une interprĂ©tation moderne. Nous avons imaginĂ© avec lui le Victoire n°568, une randonneuse lĂ©gĂšre qui marie Ă  la perfection composants modernes et feeling d’antan. EN : François is an enthusiast of randonneuse bicycles made in France in the mid-20th century. Until recently, he rode an original Routens, and contacted us to build a modern interpretation for him. Together, we created the Victoire n°568, a lightweight randonneuse that perfectly blends modern components with the character of days gone by.
very special color for Raffaele in Munich! thanks very special color for Raffaele in Munich! thanks @bici_raffaele #ᮍᮀᮅᮇÉȘÉŽÉȘ᎛ᎀʟʏ time too build the #bike whit #ingridbikecomponents . in bocca al lupo.
merci @victoirecycles FR : Voisin de notre ateli merci @victoirecycles FR : Voisin de notre atelier Ă  Beaumont, Bertrand nous a contactĂ© pour rĂ©aliser un vĂ©lo en accord avec ses convictions : une machine durable, sportive, mais avant tout agrĂ©able Ă  conduire et Ă  emmener sur toutes les routes et les chemins. DĂ©jĂ  possesseur d’un vĂ©lo Victoire de route achetĂ© d’occasion, nous avons rĂ©alisĂ© avec lui un gravel multi-fonctions, le Victoire n°585, dont l’équipement et la peinture rappelle les aspirations de Bertrand. EN : A neighbour of our workshop in Beaumont, Bertrand contacted us to create a bike that matched his values: a machine that’s durable, sporty, but above all enjoyable to ride and take on any road or path. Already the owner of a Victoire road bike bought second-hand, we worked with him to build a multi-purpose gravel bike, the Victoire n°585, whose equipment and paintwork reflect Bertrand’s aspirations.
thanks @j.laverackbicycles The GRiT 57 is our mos thanks @j.laverackbicycles The GRiT 57 is our most versatile gravel frame yet, with clearance for 57mm tyres, because exploration isn’t about how far the map goes — it’s about how far your bike will take you. We're back with another custom build, featuring a SRAM AXS "mullet" build with an Eagle X01 derailleur, INGRID crank, ÆRA GR50 Carbon gravel wheels and finished with Deda DRC components. Featuring; GRiT II AM64 – 60cm frame Pave frame finish Engraved headbadge Deda Gera Curvy Gravel Disc Fork Deda Gera 31.7 Carbon Bars 46cm Deda DCR SuperBox stem 90mm DCR Headset SRAM Force Eagle XO1 Mullet 10-52T Ingrid Chainset Swap – 36t ÆRA GR|50 carbon rims laced with Sapim CX-Ray spokes and brass nipples, hand-built in the UK ÆRA No.5 Hubs Continental RaceKing 29×2.2 Ingrid T47 Bottom Bracket ÆRA Seatpost Clamp Hope Black RX4+ Calipers & 160mm Discs REVERB AXS XPLR 74mm Seatpost SQLab 614 14cm Saddle SQLab 714 Bar Tape Thinking of your own bespoke build? Get in touch to arrange a test ride and discover the award winning and unrivalled ride quality of a J.Laverack. #JLaverack #GRiT #ENVE #SRAM #RideÆRA #Titaniumbike #CustomBike #BespokeBike #GRiT57
merci @victoirecycles FR : Quelques photos supplém merci @victoirecycles FR : Quelques photos supplémentaires du Victoire n°581, fabriqué par Matthieu, peint par Max et assemblé par Antoine. EN: A few more photos of Victoire No. 581, built by Matthieu, painted by Max, and assembled by Antoine.
thanks @enigmabicycles The ESKER MK.2 is for rid thanks @enigmabicycles The ESKER MK.2 is for riders who crave speed, agility and endurance across any terrain. From smooth tarmac to twisting trails, it delivers precision, control, and the unmistakable feel of titanium. Built for Juri, this custom ESKER MK.2 single-speed gravel bike was handcrafted here in the UK from Reynolds Gr9 titanium. It features a bespoke 3D-printed chain tensioner and finishing touches from @hopetech, @ingridcomponents, and @schwalbetires, making it unmistakably unique ✹ This stunning build has now arrived in Estonia, and we look forward to hearing all about Juri’s adventures đŸš” Explore the ESKER MK.2 âžĄïž https://www.enigmabikes.com/products/esker-mk-2-signature-2025 #gravelbike #gravelcycling #titaniumbike #tibike #madeintheuk #custombikes #enigmabikes
Instagram post 18074289614154562 Instagram post 18074289614154562
merci @tensiondechaine AĂ©ro gravel 😎 On va pas f merci @tensiondechaine AĂ©ro gravel 😎 On va pas faire les fines bouches : le pĂ©dalier @ingridcomponents est une beautĂ© 💅 Mais ! Un truc qui me saoule beaucoup avec ces pĂ©daliers tiers, comme les White Industries aussi, c'est le standard de fixation des plateaux : ils sont tous diffĂ©rents... Donc le choix devient trĂšs limitĂ©, Ă  part les plateaux de la marque tu n'as pas de choix. Ingrid a quand mĂȘme eu le bon goĂ»t de sortir une version pleine de ses plateaux et ça tombait bien : je voulais un plateau en 38 😁 Et c'est vrai, ça rend mĂ©ga bien 😎 #gravelbike #ingridcomponent #gravel #gravelride #aero
thanks @bossibicycles Love what a little @ingridc thanks @bossibicycles Love what a little @ingridcomponents brings to an Ultegra build. Industrial beauty at its best. Build kit - @bossibicycles Strada SS frameset - @shimanoaustralia Ultegra R8170 groupset - Bossi RD 50mm wheelset - @ingridcomponents POP crankset - @praxisworks Chainrings - @vision_tech_usa Metron Aero bars - @conti_bicycle GP5000 tyres - Bossi Bartape - @sellerepente Aleena saddle - @fsa_road NS ACR stem #bicycle #roadbike #roadbicycle #baaw #instabicycle #bicycleporn #bicyclelife #titaniumbike #titaniumbikes #newbikeday #bespokebicycle #custombicycle
thanks @singularcycles Function, practicality an thanks @singularcycles Function, practicality and beauty in one package - the Kite rides like a dream, looks stunning and is easy to work on and fix yourself. This was a special build for @made.bike with the new @chriskingbuzz jade groupset and @ingridcomponents - topped off with a very special @brooksengland Swift Ti saddle and of course @ultradynamico tyres. Pics with thanks to @robkerr6
STORY 2016 testing the first products with the B STORY 2016 testing the first products with the BR1 super team thanks @__zanchi.bruno__
thanks @augustehandmade DĂ©tails d’un cadre acier thanks @augustehandmade DĂ©tails d’un cadre acier sur mesure Soudures en laiton laissĂ©es apparentes, chaque jonction est unique. Inspiration des lugs traditionnels Finition brute protĂ©gĂ©e par un vernis transparent thermolaquĂ©. Composants choisis pour leur sobriĂ©tĂ© et leur qualitĂ©. #VĂ©loSurMesure #CadreAcier #raw #steel #brass #madeinlozere #steelisreal #steelbike #SouduresLaiton #brazing #AugusteHandmade #custombike #artisan #madebyhand #HandbuiltBike #BikeDetails
merci @distance.bike FR : LancĂ© en aoĂ»t 2022, le merci @distance.bike FR : LancĂ© en aoĂ»t 2022, le Distance Croix-Morand a Ă©tĂ© conçu comme un vĂ©lo polyvalent pouvant alterner gravel, vĂ©lotaf et voyage / bikepacking. Le modĂšle prĂ©sentĂ© ici est certainement le plus excentrique que nous ayons produit. Hubert, son propriĂ©taire, nous a commandĂ© une teinte spĂ©ciale validĂ©e avec lui par l’envoi d’un tube tĂ©moin Ă  domicile, en Autriche ! Il nous a Ă©galement fourni l’essentiel des composants, Ă  l’exception de quelques piĂšces issues de nos fournisseurs favoris comme @chriskingbuzz et @ingridcomponents .Le rĂ©sultat ne laisse pas indiffĂ©rent !Petit scoop : ce Croix-Morand est certainement le dernier que nous prĂ©sentons ici. Nous travaillons actuellement sur son remplaçant, que nous dĂ©voilerons trĂšs prochainement. Restez connectĂ©s ! EN : Launched in August 2022, the Distance Croix-Morand was designed as a versatile bike that can be used for gravel riding, commuting, and touring/bikepacking. The model shown here is certainly the most eccentric we have ever produced. Hubert, its owner, ordered a special color from us, which we confirmed with him by sending a sample tube to his home in Austria! He also supplied us with most of the components, with the exception of a few parts from our favorite suppliers such as Chris King and Ingrid. The result is sure to impress! A little scoop: this Croix-Morand is certainly the last one we will be presenting here. We are currently working on its replacement, which we will unveil very soon. Stay tuned!
thanks @211cycles Un style rĂ©solument moderne pou thanks @211cycles Un style rĂ©solument moderne pour ce e-MR4 qui avec 13kg seulement sur la balance permet d’aborder une pratique tant sportive que urbaine. #heartmade in đŸ‡”đŸ‡č
Follow on Instagram

INGRID is an Italian trademark licenced to:

MOSCONI s.r.l.
via la Villa 28 zona artigianale Ghilardino
61034 Fossombrone, PU – Italy
P.IVA e C.F. IT02661760419

Facebook Instagram

FIND AUTHORIZED DEALERS

© 2026 ingrid.bike

  • Terms and Conditions
  • Privacy policy
  • B2B Registration
  • Shop
  • Bikes and Friends
  • Contacts
  • Account
Shopping Cart 0