Skip to content

FAKES ARE NOT A GOOD DEAL, EVER - BEWARE OF COUNTERFEIT PRODUCTS, WE SELL ONLY THROUGH AUTHORIZED RETAILERS AND INGRID.BIKE - view all dealers

Ingrid
  • Shop
  • Bikes and Friends
  • Contacts
  • Account
  • Shopping Cart 0

    • No products in the cart.

FAKES ARE NOT A GOOD DEAL, EVER - BEWARE OF COUNTERFEIT PRODUCTS, WE SELL ONLY THROUGH AUTHORIZED RETAILERS AND INGRID.BIKE - view all dealers

Ingrid

ingridcomponents

info@ingrid.bike
thanks @itsnotabikeshop Kicking off the new year thanks @itsnotabikeshop Kicking off the new year with a fresh build for our friend Sean (no, not our Sean, just another Sean with impeccable taste and a Beach Club to drool over 🤤) @beachclubzzz Gravioli, custom paint complemented by a suite of @chriskingbuzz bits in Matte Midnight, with hubs custom laced to @astralcycling hoops wrapped in @ultradynamico 650b rubber 👌, @shimanogravel GRX group, @ingridcomponents crankset, @fiziknorthamerica saddle, Ti cages from @ron_kingcage, and a really sweet titanium stem and seatpost made by none other than the legend @stevepottsbicycles ! This build was a long time coming for Sean, an excellent human and longtime supporter of our little shop who finally got to treat himself to a custom build 😻 thank you Sean!! Training for the LA Invitational triple scoop starts now 😉 if you see Sean out cruising on the Gravioli say ciao! We have some of these frames ready to rock here at the shop if you like what you see 😘 #itsnotabikeshop
grazie @ciclibarco Ray’s Sleigh . Velato red is a grazie @ciclibarco Ray’s Sleigh . Velato red is a timeless, spot-on choice, especially when paired with carefully chosen components. Finding the right balance between efficiency, elegance, and unmistakable Italian flair comes down to care, experience, and close attention to detail. . For those who were a little late with their letter to Santa, here are the full specs: . - Valsugana frame crafted with @columbus_official Spirit tube set - Columbus Futura All Roads fork - @campagnolosrl Ekar GT groupset - @ingridcomponents POP crankset - @damilcomponents Monstercross wheels - @ridededa Zero100 cockpit with gravel handlebars - @crankbrothers Eggbeater 1 pedals - @pirelli_cycling Cinturato Gravel RC tyres . Happy Holidays from the Barco family! 🎄 #nontiservonoleali
10 YEARS thanks 10 YEARS thanks
thanks @slugbicycles ____Pre-order Ends This Week_ thanks @slugbicycles ____Pre-order Ends This Week___ @jerometave started with our stock XT kit and swapped in some choice parts from @protostudia , @ingridcomponents , @doom.bars , and @dukeracingwheels Pre-order ends this week. Don’t miss out. #slug | #slugcorp | #slugbicycles
thanks @charboncycles VÉLOS D'EXPOSITION EN VENTE thanks @charboncycles VÉLOS D'EXPOSITION EN VENTE : - CHARBON Gravel (rose) . 3990 > 3200 euros . Taille S . Groupe Shimano GRX 1x11v . Fourche Columbus Cross+ . Roues DT Swiss G1800 . Périphériques Ritchey Comp - CHARBON All Road (Multicolore) . 6990 > 5500 euros . Taille M . Groupe Sram Rival AXS 1x12v . Pédalier Ingrid . Fourche Columbus All Road . Roues Hunt 50 Aero Carbon . Pneus Continental GP5000 AR . Périphériques Deda Superzero Carbon . Rack et bagagerie Tailfin Custom . Peinture Custom par Curtis Bullock @savethepostalservice - CHARBON Gravel (brun) . 3990 > 2800 euros . Taille S . Groupe Shimano GRX 1x11v . Fourche Columbus Cross+ . Roues DT SWISS G1800 . Périphériques Ritchey Comp . Petit poc sur top tube > remplissage & nouvelle peinture = +400 euros - CHARBON All Road (bleu) . 3990 > 2800 euros . Taille M . Groupe Sword 2x10v . Fourche Columbus All Road . Roues DT Swiss E1800 . Périphériques Zipp . Petit poc sur top tube > remplissage & nouvelle peinture = +400 euros @stolengarage @association_artisans_cycles #framebuilding #filletbrazing #handmade #custom #custombike #bike #cycle #cycling #stainlesssteel #artisan #artisanat #paintjob #faitmainenfrance #craft #artisanatducycles #workshop #paint #bespokebike #custombicycle #customsteelbike #handmadebicycles #steelisreal
STORY grazie Alex @garage6studio [Studio] Ci sono STORY grazie Alex @garage6studio [Studio] Ci sono piccoli produttori che riescono a ritagliarsi un posto nell'oceano della bike industries. @ingridcomponents, italianissimi, hanno trovato il loro spazio e li hanno pure contraffatti. Segno che si copiano sempre i prodotti migliori. Voi però comprate l'originale, mi raccomando, perché queste piccole realtà, investano molto in tempo e risorse, per creare prodotti unici e di qualità. #Garage6Studio #StudioPhotogtapy #CncMachines #BikeParts #IngridComponents
merci @victoirecycles FR : Jean-Louis est le frè merci @victoirecycles FR : Jean-Louis est le frère de François, le propriétaire du Victoire n°568, une randonneuse modernisée que nous vous présentions précédemment. Jean-Louis a accompagné François lors de l’étude posturale de celui-ci, dans notre atelier à Beaumont, en Auvergne. Il s’est décidé à cette occasion de lui aussi commander un vélo Victoire, répondant au même cahier des charges que celui de son frère, mais avec quelques différences marquées. Nous vous présentons le Victoire n°569, une randonneuse légère et fraternelle. EN : Jean-Louis is the brother of François, the owner of Victoire No. 568, a modernized randonneuse that we presented to you previously. Jean-Louis accompanied François during his bike fitting at our workshop in Beaumont, Auvergne. On that occasion, he decided to order a Victoire for himself, with the same specifications as his brother’s, but with a few notable differences. Go to our website to discover Jean-Louis’ Victoire.
merci• @victoirecycles FR : François est un amateu merci• @victoirecycles FR : François est un amateur des randonneuses fabriquées en France au milieu du XX° siècle. Il roulait jusqu’aujourd’hui sur un Routens d’époque, et nous a contacté pour lui en construire une interprétation moderne. Nous avons imaginé avec lui le Victoire n°568, une randonneuse légère qui marie à la perfection composants modernes et feeling d’antan. EN : François is an enthusiast of randonneuse bicycles made in France in the mid-20th century. Until recently, he rode an original Routens, and contacted us to build a modern interpretation for him. Together, we created the Victoire n°568, a lightweight randonneuse that perfectly blends modern components with the character of days gone by.
very special color for Raffaele in Munich! thanks very special color for Raffaele in Munich! thanks @bici_raffaele #ᴍᴀᴅᴇɪɴɪᴛᴀʟʏ time too build the #bike whit #ingridbikecomponents . in bocca al lupo.
merci @victoirecycles FR : Voisin de notre ateli merci @victoirecycles FR : Voisin de notre atelier à Beaumont, Bertrand nous a contacté pour réaliser un vélo en accord avec ses convictions : une machine durable, sportive, mais avant tout agréable à conduire et à emmener sur toutes les routes et les chemins. Déjà possesseur d’un vélo Victoire de route acheté d’occasion, nous avons réalisé avec lui un gravel multi-fonctions, le Victoire n°585, dont l’équipement et la peinture rappelle les aspirations de Bertrand. EN : A neighbour of our workshop in Beaumont, Bertrand contacted us to create a bike that matched his values: a machine that’s durable, sporty, but above all enjoyable to ride and take on any road or path. Already the owner of a Victoire road bike bought second-hand, we worked with him to build a multi-purpose gravel bike, the Victoire n°585, whose equipment and paintwork reflect Bertrand’s aspirations.
thanks @j.laverackbicycles The GRiT 57 is our mos thanks @j.laverackbicycles The GRiT 57 is our most versatile gravel frame yet, with clearance for 57mm tyres, because exploration isn’t about how far the map goes — it’s about how far your bike will take you. We're back with another custom build, featuring a SRAM AXS "mullet" build with an Eagle X01 derailleur, INGRID crank, ÆRA GR50 Carbon gravel wheels and finished with Deda DRC components. Featuring; GRiT II AM64 – 60cm frame Pave frame finish Engraved headbadge Deda Gera Curvy Gravel Disc Fork Deda Gera 31.7 Carbon Bars 46cm Deda DCR SuperBox stem 90mm DCR Headset SRAM Force Eagle XO1 Mullet 10-52T Ingrid Chainset Swap – 36t ÆRA GR|50 carbon rims laced with Sapim CX-Ray spokes and brass nipples, hand-built in the UK ÆRA No.5 Hubs Continental RaceKing 29×2.2 Ingrid T47 Bottom Bracket ÆRA Seatpost Clamp Hope Black RX4+ Calipers & 160mm Discs REVERB AXS XPLR 74mm Seatpost SQLab 614 14cm Saddle SQLab 714 Bar Tape Thinking of your own bespoke build? Get in touch to arrange a test ride and discover the award winning and unrivalled ride quality of a J.Laverack. #JLaverack #GRiT #ENVE #SRAM #RideÆRA #Titaniumbike #CustomBike #BespokeBike #GRiT57
merci @victoirecycles FR : Quelques photos supplém merci @victoirecycles FR : Quelques photos supplémentaires du Victoire n°581, fabriqué par Matthieu, peint par Max et assemblé par Antoine. EN: A few more photos of Victoire No. 581, built by Matthieu, painted by Max, and assembled by Antoine.
thanks @enigmabicycles The ESKER MK.2 is for rid thanks @enigmabicycles The ESKER MK.2 is for riders who crave speed, agility and endurance across any terrain. From smooth tarmac to twisting trails, it delivers precision, control, and the unmistakable feel of titanium. Built for Juri, this custom ESKER MK.2 single-speed gravel bike was handcrafted here in the UK from Reynolds Gr9 titanium. It features a bespoke 3D-printed chain tensioner and finishing touches from @hopetech, @ingridcomponents, and @schwalbetires, making it unmistakably unique ✨ This stunning build has now arrived in Estonia, and we look forward to hearing all about Juri’s adventures 🚵 Explore the ESKER MK.2 ➡️ https://www.enigmabikes.com/products/esker-mk-2-signature-2025 #gravelbike #gravelcycling #titaniumbike #tibike #madeintheuk #custombikes #enigmabikes
Instagram post 18074289614154562 Instagram post 18074289614154562
merci @tensiondechaine Aéro gravel 😎 On va pas f merci @tensiondechaine Aéro gravel 😎 On va pas faire les fines bouches : le pédalier @ingridcomponents est une beauté 💅 Mais ! Un truc qui me saoule beaucoup avec ces pédaliers tiers, comme les White Industries aussi, c'est le standard de fixation des plateaux : ils sont tous différents... Donc le choix devient très limité, à part les plateaux de la marque tu n'as pas de choix. Ingrid a quand même eu le bon goût de sortir une version pleine de ses plateaux et ça tombait bien : je voulais un plateau en 38 😁 Et c'est vrai, ça rend méga bien 😎 #gravelbike #ingridcomponent #gravel #gravelride #aero
thanks @bossibicycles Love what a little @ingridc thanks @bossibicycles Love what a little @ingridcomponents brings to an Ultegra build. Industrial beauty at its best. Build kit - @bossibicycles Strada SS frameset - @shimanoaustralia Ultegra R8170 groupset - Bossi RD 50mm wheelset - @ingridcomponents POP crankset - @praxisworks Chainrings - @vision_tech_usa Metron Aero bars - @conti_bicycle GP5000 tyres - Bossi Bartape - @sellerepente Aleena saddle - @fsa_road NS ACR stem #bicycle #roadbike #roadbicycle #baaw #instabicycle #bicycleporn #bicyclelife #titaniumbike #titaniumbikes #newbikeday #bespokebicycle #custombicycle
thanks @singularcycles Function, practicality an thanks @singularcycles Function, practicality and beauty in one package - the Kite rides like a dream, looks stunning and is easy to work on and fix yourself. This was a special build for @made.bike with the new @chriskingbuzz jade groupset and @ingridcomponents - topped off with a very special @brooksengland Swift Ti saddle and of course @ultradynamico tyres. Pics with thanks to @robkerr6
STORY 2016 testing the first products with the B STORY 2016 testing the first products with the BR1 super team thanks @__zanchi.bruno__
thanks @augustehandmade Détails d’un cadre acier thanks @augustehandmade Détails d’un cadre acier sur mesure Soudures en laiton laissées apparentes, chaque jonction est unique. Inspiration des lugs traditionnels Finition brute protégée par un vernis transparent thermolaqué. Composants choisis pour leur sobriété et leur qualité. #VéloSurMesure #CadreAcier #raw #steel #brass #madeinlozere #steelisreal #steelbike #SouduresLaiton #brazing #AugusteHandmade #custombike #artisan #madebyhand #HandbuiltBike #BikeDetails
merci @distance.bike FR : Lancé en août 2022, le merci @distance.bike FR : Lancé en août 2022, le Distance Croix-Morand a été conçu comme un vélo polyvalent pouvant alterner gravel, vélotaf et voyage / bikepacking. Le modèle présenté ici est certainement le plus excentrique que nous ayons produit. Hubert, son propriétaire, nous a commandé une teinte spéciale validée avec lui par l’envoi d’un tube témoin à domicile, en Autriche ! Il nous a également fourni l’essentiel des composants, à l’exception de quelques pièces issues de nos fournisseurs favoris comme @chriskingbuzz et @ingridcomponents .Le résultat ne laisse pas indifférent !Petit scoop : ce Croix-Morand est certainement le dernier que nous présentons ici. Nous travaillons actuellement sur son remplaçant, que nous dévoilerons très prochainement. Restez connectés ! EN : Launched in August 2022, the Distance Croix-Morand was designed as a versatile bike that can be used for gravel riding, commuting, and touring/bikepacking. The model shown here is certainly the most eccentric we have ever produced. Hubert, its owner, ordered a special color from us, which we confirmed with him by sending a sample tube to his home in Austria! He also supplied us with most of the components, with the exception of a few parts from our favorite suppliers such as Chris King and Ingrid. The result is sure to impress! A little scoop: this Croix-Morand is certainly the last one we will be presenting here. We are currently working on its replacement, which we will unveil very soon. Stay tuned!
Follow on Instagram

INGRID is an Italian trademark licenced to:

MOSCONI s.r.l.
via la Villa 28 zona artigianale Ghilardino
61034 Fossombrone, PU – Italy
P.IVA e C.F. IT02661760419

Facebook Instagram

FIND AUTHORIZED DEALERS

© 2026 ingrid.bike

  • Terms and Conditions
  • Privacy policy
  • B2B Registration
  • Shop
  • Bikes and Friends
  • Contacts
  • Account
Shopping Cart 0